Andersen Installation Materials

Andersen installation materials

High-performing installation materials for high-performing windows and patio doors. Andersen installation materials have been rigorously tested and developed for an effective installation you can feel confident about.

Installation tools

Wondering how much you need?

Use our calculator to determine quantities of flashing and sealing products tested with Andersen® products.

Installation instructions

Get installation instructions for your window or door. Instructions include preparing the rough opening, sealing, shimming, fastening, flashing and water management.

Andersen high-performing sealant

  • Excellent long-term durability and adhesion to Andersen® product substrates and common building materials
  • Paintable after 1 hour
  • Solvent-free
  • Can be applied from 10°F to 110°F
  • Sealant accommodates 50% movement
  • Available in 10.1 oz tubes and 20 oz foil packs (select colors)
  • Click the following links to access: TDS or SDS
Andersen Sealant

Andersen straight flashing tape

  • Apply at surface temperatures as low as 0°F (-18°C) or high as 140°F (60°C)
  • Asphalt and solvent free means product will not liquefy, bleed, or melt in extreme summer temperatures
  • Resists UV exposure for 12 months
  • Superior high tack acrylic adhesion sticks and stays adhered
  • Powered by 3M™ technology
  • Available in 3 sizes:
    • 4” x 33’
    • 4” x 75’
    • 6" x 33'
    • 6” x 75’
  • Click the following links to access: TDS 
Flashing Tape

Andersen installation foam

  • Seals air gaps around windows and doors
  • Minimal expansion and low-pressure build
  • Trimmable in as little as 60 minutes
  • Cured foam remains soft and pliable
  • Repels moisture
  • Superior performance in a wide range of environments
  • Click the following links to access: TDS or SDS
Installation Foam